Civil Engineering Services: Pumping Stations and Pipeline Projects in New South Wales and QueenslandFebruary 27, 2019
Pumping stations keep the fluid transporting segments of our infrastructure moving. In industry, they transport oil ashore. The black crude oil is delivered to a refinery, where it's processed in fractional distillation towers. For water pumping stations and their pipelines, well, these are the infrastructural assets civil engineering projects deal with on a day-to-day basis. As a rule, a pumping station provides plenty of initial impetus, but that energy can only go so far.
A Key Infrastructural Asset
Water is coming from a lake or reservoir. There's a pumping station built on the edge of a body of water in Queensland. No, the newest civil engineering project is set to begin in New South Wales. The Queensland service commences later in the year. No matter, the services are fairly similar. There's land to cross, and the pumping station will connect to a pipeline, but the land contours are already attenuating the computer-modelled freshwater flow. Next up on the agenda, there are more pumping stations to add to the design plans, which will keep the pressure high so that the flow conquers the land's numerous elevated planes.
Offsetting Elevated Land Issues
For both Queensland and New South Wales, there are mountain ranges and gently rolling hills to complicate matters. They have enough elevation on their sloping peaks to give a technical services engineer a headache, that's true. So a single-stage water pump house won't be enough to get the water all the way to its final destination. There's a second, perhaps even a third satellite installation to design. Using all of their resources, the consultancy service carries out a preliminary study, which routes the pipeline and pinpoints the location for the secondary pump houses. Simulations run, hydrology experiments are conducted, and, eventually, the component project parts, excavators and all, gather on site.
A Deeper Understanding
What's the alkalinity of the pipeline soil like? Will the trenches require a specialized borehole provision service? These and other questions like them are dealt with before a tool is ever lifted. Electrical engineers bring in power connections for the pumps. There's filtration gear to provide, too. No doubt about it, this is a massive project.
Civil engineering projects like this have a beginning, a middle, and an end. That principle works temporally, and it also applies as a geotechnical precept. For instance, there's the project start, where the initial fluid intake and filtration system sits. In the middle, there are pipeline routing issues and excavation permissions to handle. Then, whether the flow is heading for a Queensland farm's irrigation system or into a New South Wales city, there are valving arrangements, extra pumping stations and water receivers to construct, and a whole slew of civil engineering type problems to solve before the gear gets commissioned.
Optimized by NetwizardSEO.com.au
- Construction Design Brief and Cost Estimates: Why Should Clients Be Guided Accordingly?
- Civil Engineering Services: The Need for Farm Dams and Detention Storage in Australia
- Structural Engineering Services: Foundation and Underpinning
- The Importance of Structural Reliability Analysis in an Engineering Design
- What are the Conditions in Which Bioretention Systems are Required?
- Construction Project Management: The Importance of Feasibility Studies
- Civil Engineering Services: Pumping Stations and Pipeline Projects in New South Wales and Queensland
- Erosion and Sediment Control Treatments: Monitoring and Guidelines
- Structural Engineering: Concrete Slabs and Its Benefits
- Project Management: Basic Principles of Master Planning and Urban Design
- Hydraulic Design of Dams: Some Basic Principles and Planning Guide
- Oil and Chemical Spill Capture Systems: How This Technology Can Help the Environment
- View all articles…